序号 |
名称 |
发表刊物/论文集 |
论文作者 |
认定级别 |
发表/出版时间 |
1 |
Flange bolt loosening detection using an improved you only lookonceversion8 method and angle estimation |
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE |
李美求 |
T1 |
2025-11-24 |
2 |
Reshaping, performance optimization and failure mechanisms of self-piercing riveted joints in 5083 aluminum alloys under axial compressive loads |
ENGINEERING FAILURE ANALYSIS |
张先炼 |
T1 |
2025-07-01 |
3 |
A novel optimization scheme for structure and balance of compound balanced beam pumping units using the PSO, GA, and GWO algorithms |
Petroleum Science |
王杰 |
T1 |
2025-03-01 |
4 |
弯扭叶片涡轮钻具输出性能研究 |
西安石油大学学报自然科学版 |
袁新梅 |
T2 |
2025-11-25 |
5 |
Synergistic strengthening of 4140 steel via induction hardening-ultrasonic surfacerolling: Constructing multi-scale gradient microstructureand boostingwear resistance |
SURFACE & COATINGS TECHNOLOGY |
朱琦玮 |
T2 |
2025-10-24 |
6 |
Numerical investigation on the thermal radiation characteristicsin deepwaterwell testing blowoff with/without spraying |
APPLIED THERMAL ENGINEERING |
孙巧雷 |
T2 |
2025-09-11 |
7 |
Modeling of critical sand-carrying flow rate of gas-liquid-solid three-phase flow in an inclined pipe |
Results in Engineering |
张慢来 |
T2 |
2025-08-28 |
8 |
考虑材料动态记忆特性的疲劳累积损伤模型 |
中国机械工程 |
周思柱 |
T2 |
2025-08-08 |
9 |
Study of sand particle transport characteristics and different critical velocities in sand-producing wells via indoor experiments |
SCIENTIFIC REPORTS |
张慢来 |
T2 |
2025-07-15 |
10 |
Evaluating the temperature profile and pressure drops in gas-lift wells via coupled temperature-pressure analysis |
SCIENTIFIC REPORTS |
王杰 |
T2 |
2025-07-02 |
11 |
深水测试管柱内管横向动态特性 |
中国海上油气 |
孙巧雷 |
T2 |
2025-06-28 |
12 |
Existence and destruction of tori in a discontinuous oscillatorunder quasi-periodic excitations |
PHYSICA D-NONLINEAR PHENOMENA |
缪鹏程 |
T2 |
2025-06-26 |
13 |
Analysis of themigration patternsof sand particlesbelow thescrew pump in wellsbased onexperiments andnumerical simulations |
SCIENTIFIC REPORTS |
张慢来 |
T2 |
2025-06-17 |
14 |
Study on scaling and plugging law of completion screen in high-water-cut well |
GeoenergyScience and Engineering |
邓福成 |
T2 |
2025-05-30 |
15 |
Effect of indentation defects on fatigue crack propagation behavior ofweld andbase material: An in-situ fatigue study |
Theoretical and Applied Fracture Mechanics |
刘少胡 |
T2 |
2025-05-24 |
16 |
Analysis of the deformation characteristics of surrounding rock due to interlayers during cyclic injection-production period of salt cavern hydrogen storage |
Fuel |
邓福成 |
T2 |
2025-04-01 |
17 |
超深井钻机绳轮疲劳寿命预测 |
特种油气藏 |
易先中 |
T2 |
2025-03-01 |
18 |
Study on the mechanism of gravel layer blockage in sand control for natural gas hydrate reservoirs |
Powder Technology |
邓福成 |
T2 |
2025-02-28 |
19 |
Study on the mechanism of decomposition of methane hydrate by the compound inhibitor |
SCIENTIFIC REPORTS |
赵金 |
T2 |
2025-02-18 |
20 |
油气装备数字孪生技术体系构建与应用示范 |
石油钻探技术 |
冯定 |
T2 |
2025-02-11 |
21 |
Strange nonchaotic attractors and bifurcation ofa four-wheel-steering vehicle system with driver steering control |
JOURNAL OF SOUND AND VIBRATION |
缪鹏程 |
T2 |
2025-02-01 |
22 |
超声焊接纯铜过程塑性变形与微观组织演变 |
焊接学报 |
李欢 |
T2 |
2025-01-14 |
23 |
基于热成像技术的柔性压裂管非金属段缺陷检测方法研究 |
中国安全生产科学技术 |
刘少胡 |
T3 |
2025-11-30 |
24 |
脉冲电流修复含多裂纹高压弯头效果对比研究 |
石油机械 |
张思 |
T3 |
2025-11-25 |
25 |
A reviewof research on therefuellingprocess of on-boardhydrogen storagetanks |
Flow Measurement and Instrumentation |
李美求 |
T3 |
2025-11-04 |
26 |
新型可离塔运行施工升降机设计 |
机械设计 |
华剑 |
T3 |
2025-10-20 |
27 |
非圆弯头冲蚀磨损数值模拟 |
中国腐蚀与防护学报 |
华剑 |
T3 |
2025-10-01 |
28 |
基于DRMPSO的绳驱冗余机械臂逆运动学求解与运动规划 |
现代制造工程 |
刘洋 |
T3 |
2025-09-18 |
29 |
Flow Characteristics and Corrosion Mechanisms of Carbon Dioxide in Different Phases at Pipeline Defects |
ENERGY&FUELS |
刘少胡 |
T3 |
2025-09-15 |
30 |
增距式抽油机换向装置结构设计及分析 |
机械传动 |
袁新梅 |
T3 |
2025-09-15 |
31 |
高温高黏度暂堵剂液滴形态与成型效率 |
科学技术与工程 |
华剑 |
T3 |
2025-09-15 |
32 |
二级进风口收缩角对涡轮分级机分级性能的影响 |
机械设计 |
华剑 |
T3 |
2025-09-05 |
33 |
脉冲射流附壁自激水力振荡器振荡特性 |
断块油气田 |
付必伟 |
T3 |
2025-09-05 |
34 |
Study on friction and wear failure mechanism of coiled tubing and casingat hightemperature |
Materials Today Communications |
刘少胡 |
T3 |
2025-07-29 |
35 |
基于PB-BBD响应面法优化内置钻头多维冲击器性能 |
科学技术与工程 |
钱利勤 |
T3 |
2025-07-16 |
36 |
高速钻头金属密封结构优化设计与试验研究 |
石油机械 |
刘洋 |
T3 |
2025-06-15 |
37 |
连续管防喷器控制系统的压力控制策略研究 |
石油机械 |
吴文秀 |
T3 |
2025-06-13 |
38 |
柔性石墨环密封性能及其影响因素研究 |
机电工程 |
张先勇 |
T3 |
2025-05-20 |
39 |
涡轮钻具四支点接触球轴承结构参数优化设计与磨损仿真分析 |
科学技术与工程 |
周思柱 |
T3 |
2025-05-10 |
40 |
复合式三相旋流分离器分离性能分析 |
石油机械 |
黄天成 |
T3 |
2025-05-10 |
41 |
基于机器学习算法的油嘴冲蚀磨损预测 |
科学技术与工程 |
刘少胡 |
T3 |
2025-04-18 |
42 |
连续油管注入头链传动系统损伤原因分析 |
科学技术与工程 |
冉小丰 |
T3 |
2025-04-15 |
43 |
The Influence of Parabolic Static Mixers on the Mixing Performance of Heavy Oil Dilution |
PROCESSES |
华剑 |
T3 |
2025-04-09 |
44 |
Research on Working Mechanism and Structural Optimization of High-Speed Bearing of Tricone Bits Based on Finite Difference Method |
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME |
刘洋 |
T3 |
2025-04-01 |
45 |
Weight on Bit and Hook Load Prediction in Drilling Based on the GA-RF |
JOURNAL OF ENERGY RESOURCES TECHNOLOGY |
刘少胡 |
T3 |
2025-03-25 |
46 |
酸压管汇刺漏失效分析及裂纹扩展数值模拟 |
长江大学学报（自然科学版） |
冉小丰 |
T3 |
2025-03-25 |
47 |
陶瓷膜过滤换热一体化元件余热回收性能分析 |
石油机械 |
付必伟 |
T3 |
2025-03-10 |
48 |
绘画作品-林海迷雾&向阳而生 |
编辑之友 |
陈金栓 |
T3 |
2025-03-05 |
49 |
基于非牛顿流体的涡轮输出性能影响研究 |
石油机械 |
周传喜 |
T3 |
2025-02-28 |
50 |
考虑激振峰值的三缸压裂泵振动频率控制算法 |
吉林大学学报(工学版) |
吴文秀 |
T3 |
2025-02-19 |
51 |
基于粒子群算法的涡轮钻具叶片优化 |
石油钻采工艺 |
周思柱 |
T3 |
2025-02-15 |
52 |
基于遗传算法的冲缝筛管适应性研究 |
石油机械 |
邓福成 |
T3 |
2025-02-14 |
53 |
锂离子电池安全改性策略研究进展 |
储能科学与技术 |
钱利勤 |
T3 |
2025-01-02 |
54 |
基于响应面和NSGA-Ⅱ算法的切入式螺旋导叶旋流器多目标优化 |
机床与液压 |
李美求 |
T4 |
2025-10-01 |
55 |
A novel line method of the theory of critical distance for predictingthe notchedspecimen's fatigue life based on the relative stressgradient variation |
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING |
曾云 |
T4 |
2025-09-10 |
56 |
聚簇孔深穿透微钻头结构设计与试验研究 |
石油机械 |
易先中 |
T4 |
2025-09-01 |
57 |
切向增流油水分离器流场特征及分离性能研究[J].机床与液压，2025,53(17) |
机床与液压 |
易先中 |
T4 |
2025-09-01 |
58 |
含复杂腐蚀缺陷X80油气管道剩余强度预测 |
石油机械 |
易先中 |
T4 |
2025-08-01 |
59 |
Fatigue and Fretting Behaviors of Self-piercing Riveting in Carbon-Fiber-Reinforced Polymer Laminates and Titanium Sheets with Pre-drilling Operation |
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
张先炼 |
T4 |
2025-08-01 |
60 |
Analysis of lateral dynamic response characteristics of drilling riser during installation of deep-water Christmas tree |
JOURNAL OF ENGINEERING RESEARCH |
孙巧雷 |
T4 |
2025-06-29 |
61 |
韭菜气力扶禾装置的设计 |
包装与食品机械 |
张红 |
T4 |
2025-02-28 |
62 |
超高压法兰连接下的螺柱预紧力分布优化 |
科学技术与工程 |
李美求 |
其他 |
2025-09-05 |
63 |
大学教室多媒体控制台的人机分析与改进 |
创意设计源 |
陈金栓 |
其他 |
2025-07-20 |
64 |
激光冲击强化下泵头体材料表面残余应力演化仿真及试验研究 |
现代制造工程 |
周思柱 |
其他 |
2025-06-06 |
